RTLinux Mailinglist by date
[Thread Index]
[Top]
Last update: Fri Sep 1 00:03:00 2000
337 messages in chronological order
- 3.0 pre6d questions (psc and debugger)
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Multi-taks multi-threads?
- From: "Vincent CATROS" <vincent.catros@bigfoot.com>
- Re: [rtl] Hard disk
- From: Phil Wilshire <philw@lineo.com>
- AD-card
- From: "Peter T. Drechsler" <Peter.Drechsler@Physik.Uni-Augsburg.DE>
- Re: [rtl] 3.0 pre6d questions (psc and debugger)
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] AD-card
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] Multi-taks multi-threads?
- Re: [rtl] Multi-taks multi-threads?
- From: kumsta <NOSPAM_christophe.kumsta@free.fr>
- RTLinux rt_com serial port driver question
- From: "Skipworth, William" <William.Skipworth@msfc.nasa.gov>
- DMA latency
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- FP in rtl threads
- From: Kai Mueller <mueller@leo.ifr.ing.tu-bs.de>
- Re: [rtl] AD-card
- From: David Schleef <ds@stm.lbl.gov>
- RTL V3 - how to
- From: Zhigao Yao <zyao@ces.clemson.edu>
- Re: [rtl] RTL V3 - how to
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- rt_global_sti
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- Re: [rtl] RTL V3 - how to
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- NT and realtime
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- Re: [rtl] NT and realtime
- From: Stephane Bouchard <sbouchard@ieee.org>
- Re: [rtl] debugging a module
- From: "Wei Ren" <renwei@huawei.com>
- Re: [rtl] NT and realtime
- From: Karim Yaghmour <karym@opersys.com>
- Re: [rtl] NT and realtime
- From: Tony Mouawad <tony@ag-tronic.com>
- Re: [rtl] RTL V3 - how to
- From: Nathan Simons <npsimons@fsmlabs.com>
- Re: [rtl] NT and realtime
- From: yodaiken@fsmlabs.com
- rtLinux on MPC 8260
- From: "chetan kumar s" <chetan.kumar@wipro.com>
- IDE flash disk boot problems
- From: Cory Papenfuss <papenfus@juneau.ece.uiuc.edu>
- Re: [rtl] RTL V3 - how to
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Re: [rtl] 3.0 pre6d questions (psc and debugger)
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Re: [rtl] debugging a module
- From: Pavel Andris <utrrandr@savba.sk>
- Re: [rtl] NT and realtime
- From: Magnus Johansson <magnus.johansson@st.se>
- Re: [rtl] IDE flash disk boot problems
- From: wolfgang guldner <w.guldner@bfad.de>
- Re: [rtl] rtLinux on MPC 8260
- From: Wolfgang Denk <wd@denx.de>
- [rtl] RTLinux rt_com serial port driver question
- From: Jochen Kuepper <Jochen@pc1.uni-duesseldorf.de>
- RTLinux without MMU CPU
- From: "Mukaila olundegun" <muki@mukky.com>
- Re: [rtl] RTLinux without MMU CPU
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] debugging a module
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] RTLinux without MMU CPU
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] RTLinux without MMU CPU
- From: yodaiken@fsmlabs.com
- Re: [rtl] RTL V3 - how to
- From: Nathan Simons <npsimons@fsmlabs.com>
- Re: [rtl] two questions about examples
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] rtLinux on MPC 8260
- From: yodaiken@fsmlabs.com
- Re: [rtl] pthread_wait_np
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] debugging a module
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] debugging a module
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] rt_printk long long output
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] rtLinux on MPC 8260
- From: Wolfgang Denk <wd@denx.de>
- Re: [rtl] rtLinux on MPC 8260
- From: yodaiken@fsmlabs.com
- Re: [rtl] rtLinux on MPC 8260
- From: Wolfgang Denk <wd@denx.de>
- Re: [rtl] rt_printk long long output
- From: Norm Dresner <ndrez@att.net>
- AGP video cards
- From: "Wayne E. Van Loon Sr." <wevl@pacifier.com>
- Programming sockets in RTL?
- From: Tony Mouawad <tony@ag-tronic.com>
- [rtl] NT and realtime
- From: Raymond_C._Minich@DRESSER.COM
- Parallel and PCI rtlinux module
- From: "Mukaila olundegun" <omukaila@xionics.co.jp>
- Re: [rtl] rt_printk long long output
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] AGP video cards
- From: kumsta <NOSPAM_christophe.kumsta@free.fr>
- Re-entrancy ? problem
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- Re: [rtl] Programming sockets in RTL?
- From: David Schleef <ds@stm.lbl.gov>
- 3.0 pre6e & segmentation faults
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Re: [rtl] debugging a module
- From: Pavel Andris <utrrandr@savba.sk>
- global FP variables
- From: Herve Lacheray <lacherh@immrc.eng.mcmaster.ca>
- Problem with Digital I/O board
- From: Bin Lin <blin@ch.engr.ucdavis.edu>
- Any Tundra Universe II Chip Drivers / Users?
- From: "Stephen D. Cohen" <scohen@xybion.com>
- Re: [rtl] IDE flash disk boot problems
- From: "Jacob Chen" <jchen@vrcomm.com>
- Re: [rtl] IDE flash disk boot problems
- From: Cory Papenfuss <papenfus@juneau.ece.uiuc.edu>
- Re: [rtl] Problem with Digital I/O board
- From: David Schleef <ds@stm.lbl.gov>
- rtl_linux_task.
- From: "christophe.menival" <christophe.menival@wanadoo.fr>
- Re: [rtl] Any Tundra Universe II Chip Drivers / Users?
- From: Phil Wilshire <philw@zentropix.com>
- I make a six figure income sharing privacy, tax reduction, and wealth secrets with others. pzzhd
- From: bob@communication411.com
- How to Pass PCI IRQ to Linux
- From: "Mukaila olundegun" <muki@mukky.com>
- Re: [rtl] How to Pass PCI IRQ to Linux
- From: yodaiken@fsmlabs.com
- Access Video ram from RTL interrupt routine
- From: Sheldon Hoffman <Sheldon@ReflectiveComputing.com>
- rtl_linux_task.
- From: "christophe.menival" <christophe.menival@wanadoo.fr>
- using mbuff
- From: Niall Khader <nkhader@excite.com>
- Re: [rtl] rtl_linux_task.
- From: yodaiken@fsmlabs.com
- Is there a way to flush a FIFO ?
- Re: [rtl] using mbuff
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- The FSL agreement
- From: Reef Morse <reef@xenon.che.ilstu.edu>
- RE: [rtl] How to Pass PCI IRQ to Linux
- From: Adolf Ahmad MS <adolf@ratelindo.co.id>
- Re: [rtl] Access Video ram from RTL interrupt routine
- From: kumsta <NOSPAM_christophe.kumsta@free.fr>
- Re: [rtl] Is there a way to flush a FIFO ?
- Re: [rtl] using mbuff
- From: "Jacek M. Holeczek" <holeczek@us.edu.pl>
- Re: [rtl] using mbuff
- From: "Jacek M. Holeczek" <holeczek@us.edu.pl>
- Re: [rtl] using mbuff
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- Re: [rtl] Is there a way to flush a FIFO ?
- From: Michael Barabanov <baraban@fsmlabs.com>
- RE: [rtl] Is there a way to flush a FIFO ?
- From: "Stephen D. Cohen" <scohen@xybion.com>
- Re: [rtl] using mbuff
- From: yodaiken@fsmlabs.com
- Re: [rtl] using mbuff
- From: "Jacek M. Holeczek" <holeczek@us.edu.pl>
- Re: [rtl] global FP variables
- From: Michael Barabanov <baraban@fsmlabs.com>
- cli()/sti() in usermode
- From: Adam Meyerowitz <adam@videodatasys.com>
- Help with PCI Interface Please
- From: "Stephen D. Cohen" <scohen@xybion.com>
- Re: [rtl] Is there a way to flush a FIFO ?
- From: yodaiken@fsmlabs.com
- Re: [rtl] cli()/sti() in usermode
- From: Adam Meyerowitz <adam@videodatasys.com>
- Re: [rtl] cli()/sti() in usermode
- From: yodaiken@fsmlabs.com
- Re: [rtl] cli()/sti() in usermode
- From: Adam Meyerowitz <adam@videodatasys.com>
- Re: [rtl] The FSL agreement
- From: David Olofson <david.olofson@reologica.se>
- No Subject
- From: Roberto Conti <lucca.sistema@uol.com.br>
- networking
- From: "SERES Lucian" <lucianseres@hotmail.com>
- generating random numbers
- From: Adi Sudewa <dewa@students.if.itb.ac.id>
- Re: [rtl] networking
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] generating random numbers
- From: David Schleef <ds@stm.lbl.gov>
- Re: [rtl] cli()/sti() in usermode
- From: yodaiken@fsmlabs.com
- rt display in usec
- From: berger patrick <patrick@zepelin.ensam.inra.fr>
- Re: [rtl] rt display in usec
- Re: [rtl] cli()/sti() in usermode
- From: Adam Meyerowitz <adam@videodatasys.com>
- RE: [rtl] rt display in usec
- From: "Dresner, Norman A." <norman_a_dresner@md.northgrum.com>
- Re: [rtl] rt display in usec
- From: berger patrick <patrick@zepelin.ensam.inra.fr>
- Re: [rtl] rt display in usec
- From: kumsta <NOSPAM_christophe.kumsta@free.fr>
- Re: [rtl] rt display in usec (add-on;)
- From: kumsta <NOSPAM_christophe.kumsta@free.fr>
- Re: [rtl] rt display in usec
- From: David Olofson <do@reologica.se>
- Re: [rtl] rt display in usec
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- Re: [rtl] rt display in usec
- From: Raymond_C._Minich@DRESSER.COM
- Re: [rtl] generating random numbers
- From: Nathan Simons <npsimons@fsmlabs.com>
- Re: [rtl] generating random numbers
- From: Adi Sudewa <dewa@students.if.itb.ac.id>
- Re: [rtl] generating random numbers
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- Programming UDP in RT
- From: "Tony Mouawad" <tony@ag-tronic.com>
- About size
- From: Binu Balakrishnan <binubal@operamail.com>
- mbuff driver 0.7.2
- From: "S.A." <sancelot@crosswinds.net>
- Re: [rtl] About size
- From: David Schleef <ds@stm.lbl.gov>
- FW: sprintf for floating point numbers in rt module
- From: "Estabridis, Janet P" <EstabridisJP@navair.navy.mil>
- large memory block problem
- From: "Wei Ren" <renwei@huawei.com>
- Re: [rtl] large memory block problem
- From: "Wei Ren" <renwei@huawei.com>
- Re: [rtl] Programming UDP in RT
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] mbuff driver 0.7.2
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- Re: [rtl] large memory block problem
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- rt and c++ preprocessing
- From: "S.A." <sancelot@crosswinds.net>
- Cheapest RTLinux platform ?
- From: Johan Stenfors <Johan.Stenfors@firstlinux.net>
- No Mail or system damage?(test, nil)
- From: "dyd" <dyd@process.buaa.edu.cn>
- Re: [rtl] FW: sprintf for floating point numbers in rt module
- From: Pavel Andris <utrrandr@savba.sk>
- RE: [rtl] generating random numbers (rtl-digest V1 #94)
- From: "KULECZ, WALTER (JSC-SD)" <walter.kulecz1@jsc.nasa.gov>
- RE: [rtl] FW: sprintf for floating point numbers in rt module
- From: "Estabridis, Janet P" <EstabridisJP@navair.navy.mil>
- Interrupt handling on PCI-DAS-1602
- From: Sheldon Hoffman <Sheldon@ReflectiveComputing.com>
- Re: [rtl] generating random numbers
- From: Wilken Boie <wboie@controlvideo.de>
- pc-104 plus linux/rtlinux
- From: "Gerald Przybylski, Lawrence Berkeley National Lab, GTP@LBL.GOV" <PRZYBYLSKI@sio2.lbl.gov>
- Re: [rtl] pc-104 plus linux/rtlinux
- From: "Dr. Chuck Hall" <chall@skyraider.mae.ncsu.edu>
- RE: [rtl] pc-104 plus linux/rtlinux
- From: "Estabridis, Janet P" <EstabridisJP@navair.navy.mil>
- R: [rtl] pc-104 plus linux/rtlinux
- From: "Giovanni Racciu" <grxystum@iol.it>
- Re: [rtl] pc-104 plus linux/rtlinux
- From: GIFFORD KEVIN K <gifford@rintintin.colorado.edu>
- RE: [rtl] FW: sprintf for floating point numbers in rt module
- From: "Estabridis, Janet P" <EstabridisJP@navair.navy.mil>
- Re: [rtl] FW: sprintf for floating point numbers in rt module
- From: David Schleef <ds@stm.lbl.gov>
- Data acquisition board & graphic card
- From: IGB <rustom@igb.umontreal.ca>
- Networking in realtime? Oh no, not again...
- From: Wilken Boie <wboie@controlvideo.de>
- rtai_sched interferes with ppp ???
- From: Wilken Boie <wboie@controlvideo.de>
- Re: [rtl] large memory block problem
- From: "Wei Ren" <renwei@huawei.com>
- Re: [rtl] rt display in usec
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] rt display in usec
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- [rtl]/[linux] Large memory Blocks II
- From: "Gloutch" <Gloutch@ifrance.com>
- Question about rtl_sched.c in 3.0pre6e.
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Re: [rtl]/[linux] Large memory Blocks II
- From: Wolfram Faul <faul@lpr.e-technik.tu-muenchen.de>
- Re: [rtl] FW: sprintf for floating point numbers in rt module
- From: Pavel Andris <utrrandr@savba.sk>
- problem with rtf_flush()
- From: joseph canou <joseph.canou@caramail.com>
- Re: [rtl] Networking in realtime? Oh no, not again...
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] rt display in usec
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] problem with rtf_flush()
- HOWTO sleep in microseconds.
- From: "Aamir Shaikh" <ashak@lycos.com>
- Re: [rtl] Networking in realtime? Trying low latency...
- From: Wilken Boie <wboie@controlvideo.de>
- Re: [rtl] HOWTO sleep in microseconds.
- From: "Wei Ren" <renwei@huawei.com>
- Something wrong ?
- From: "dyd" <dyd@process.buaa.edu.cn>
- what's the problem
- From: "dyd" <dyd@process.buaa.edu.cn>
- Is there a port of RTLinux on QED RM 52xx
- From: "Jithendranadh" <jithu@ti.com>
- 2.4.0-test6 and rtlinux version
- From: Robert Kavaler <kavaler@berkeley.innomedia.com>
- Re: [rtl] Cheapest RTLinux platform ?
- From: Peter Staudt <Peter.Staudt@Vishay.com>
- Re: [rtl] Networking in realtime? Trying low latency...
- From: Wilken Boie <wboie@controlvideo.de>
- ioremap problem
- From: Frederic Cazenave <cazenave@radar.mcgill.ca>
- Flood Pings on underpowered processors
- From: John Jeffers <jjef@inforamp.net>
- No Subject
- From: joseph canou <joseph.canou@caramail.com>
- Re: [rtl] Flood Pings on underpowered processors
- From: eric <eek105@psu.edu>
- Re: [rtl] Networking in realtime? Trying low latency...
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] Networking in realtime? Trying low latency...
- From: David Schleef <ds@stm.lbl.gov>
- Forced removal of modules
- From: Bas Kruiderink <b.w.kruiderink@ksce.nl>
- RE: [rtl] ioremap problem
- From: "Stephen D. Cohen" <scohen@xybion.com>
- RE: [rtl] Forced removal of modules
- From: "Dresner, Norman A." <norman_a_dresner@md.northgrum.com>
- Re: [rtl] Forced removal of modules
- From: WJ Atsma <watsma@mech.ubc.ca>
- Re: [rtl] ioremap problem
- From: Frederic Cazenave <cazenave@radar.mcgill.ca>
- debugging a Page Fault
- From: William Montgomery <william@opinicus.com>
- Re: [rtl] debugging a Page Fault
- From: Norm Dresner <ndrez@att.net>
- Re: [rtl] debugging a Page Fault
- From: William Montgomery <william@opinicus.com>
- Debugging RTL-Tasks
- From: oliver.schlenker@smmotioncontrol.de
- usleep in RT
- From: tony@ag-tronic.com (Tony Mouawad)
- Re: [rtl] Debugging RTL-Tasks
- From: William Montgomery <william@opinicus.com>
- RE: [rtl] debugging a Page Fault
- From: "Dresner, Norman A." <norman_a_dresner@md.northgrum.com>
- RE: [rtl] ioremap problem
- From: "Stephen D. Cohen" <scohen@xybion.com>
- Re: Re[1] [rtl] Forced removal of modules
- From: WJ Atsma <watsma@mech.ubc.ca>
- unsubscribe
- From: "P. Kadionik" <kadionik@enserb.fr>
- Port to MIPs
- From: Wang Ting <WangTi@tce.com>
- Re: [rtl] Port to MIPs
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- RE: [rtl] About size
- From: "Percy Rojas" <percyrb@uni.edu.pe>
- Re: [rtl] About size
- From: "Stuart Warren" <SWarren@btr-auto.aust.com>
- Re: [rtl] Port to MIPs
- From: yodaiken@fsmlabs.com
- Re: [rtl] Port to MIPs
- From: Nathan Simons <npsimons@fsmlabs.com>
- Re: [rtl] usleep in RT
- From: Nathan Simons <npsimons@fsmlabs.com>
- RE: [rtl] Port to MIPs
- From: Wang Ting <WangTi@tce.com>
- Re: [rtl] usleep in RT
- From: yodaiken@fsmlabs.com
- Re: [rtl] usleep in RT
- From: yodaiken@fsmlabs.com
- Re: [rtl] Port to MIPs
- From: Cort Dougan <cort@fsmlabs.com>
- Re: [rtl] usleep in RT
- From: Cort Dougan <cort@fsmlabs.com>
- Re: [rtl] usleep in RT
- From: Nathan Simons <npsimons@fsmlabs.com>
- Re: [rtl] Port to MIPs
- From: Cort Dougan <cort@fsmlabs.com>
- RTLinux om ARM
- From: Binu Balakrishnan <binubal@operamail.com>
- clock_gettime/clock_settime problem.
- From: "Wei Ren" <renwei@huawei.com>
- Problems with RT-IPC timed services?
- From: Philippe Gerum <rpm@axlog.fr>
- Re: [rtl] RTLinux om ARM
- From: yodaiken@fsmlabs.com
- RT Interrupts for an AX5411 driver
- From: Ray Eaton <raye@syscon.ee.unsw.edu.au>
- Re:
- From: Phil Wilshire <philw@zentropix.com>
- DGA graphic access
- From: Arnaud Adell <adellarnaud@yahoo.com>
- No Subject
- From: Administrator <Administrator@netpartner.pt>
- Some news about DSL
- From: Ivan Martinez <ex08@kalman.iau.dtu.dk>
- versions, rt_com and otherwise
- From: Stephen Walton <swalton@galileo.csun.edu>
- SMP irq affinity
- From: William Montgomery <william@opinicus.com>
- tcp-ip commands in rt modules
- From: Troy Davis <troy.davis@airbornedatasystems.com>
- ioremap problem
- From: Frederic Cazenave <cazenave@radar.mcgill.ca>
- How to manualy configure PCI address etc
- From: "Mukaila olundegun" <muki@mukky.com>
- Off Topic -- excuse me. ~~~SIGKILL in GDB~~~
- From: "Shankar Vasudevan" <shankarv@future.futsoft.com>
- Real Time in realtime ?
- From: Klaus Keppler <kkeppler@spb-bremen.de>
- [rtl] versions, rt_com and otherwise
- From: Jochen Kuepper <Jochen@pc1.uni-duesseldorf.de>
- Re: [rtl] tcp-ip commands in rt modules
- From: Wilken Boie <wboie@controlvideo.de>
- Scicos + DSL?
- From: Ivan Martinez <ex08@kalman.iau.dtu.dk>
- Re: [rtl] ioremap problem
- From: Frederic Cazenave <cazenave@radar.mcgill.ca>
- Re: [rtl] versions, rt_com and otherwise
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] clock_gettime/clock_settime problem.
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Real Time in realtime ?
- From: David Schleef <ds@stm.lbl.gov>
- Re: [rtl] tcp-ip commands in rt modules
- From: David Schleef <ds@stm.lbl.gov>
- Re: [rtl] Problems with RT-IPC timed services?
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Scicos + DSL?
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] DGA graphic access
- From: Bernhard Kuhn <kuhn@batian.lpr.e-technik.tu-muenchen.de>
- realtime PC hardware questions
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- Re: [rtl] versions, rt_com and otherwise
- From: Stephen Walton <swalton@galileo.csun.edu>
- rt_tulip.o hangs while receiving packets
- RTL time and NTP time
- From: "William J. Tango" <tango@physics.usyd.edu.au>
- Re: [rtl] Real Time in realtime ?
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] How to manualy configure PCI address etc
- From: "Jacek M. Holeczek" <holeczek@us.edu.pl>
- Re: [rtl] Some news about DSL
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] Real Time in realtime ?
- From: Albrecht de Jonge <A.R.W.de.Jonge@sron.rug.nl>
- [rtai] Data acquisition
- From: wolfgang guldner <w.guldner@bfad.de>
- Re: [rtl] RTL time and NTP time
- From: Michael Barabanov <baraban@fsmlabs.com>
- [Rt-com-devel] Re: [rtl] versions, rt_com and otherwise
- From: Jochen Kuepper <Jochen@pc1.uni-duesseldorf.de>
- Re: [rtl] tcp-ip commands in rt modules
- From: Wilken Boie <wboie@controlvideo.de>
- LXRT and multiple threads
- From: Francois Desruisseaux <francois.desruisseaux@opal-rt.com>
- Re: [rtl] LXRT and multiple threads
- From: Paolo Mantegazza <mantegazza@aero.polimi.it>
- Re: [rtl] [rtai] Data acquisition
- From: eric <eek105@psu.edu>
- clock drifts
- From: Pedro Miguel Rebelo Martins <pmartins@di.fc.ul.pt>
- [reminder] do_gettimeofday available in hard real-time for RTAI
- From: Karim Yaghmour <karym@opersys.com>
- Press Controll
- From: "Andrew Hooper" <andrew@best.net.nz>
- Re: [rtl] RTL time and NTP time
- From: "William J. Tango" <tango@physics.usyd.edu.au>
- Keyboard Lockup
- From: smithk@biotronik.com (Kirk Smith)
- Re: [rtl] [reminder] do_gettimeofday available in hard real-time for RTAI
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] [rtai] Data acquisition
- From: wolfgang guldner <w.guldner@bfad.de>
- RE: [rtl] clock drifts
- From: "Wikston, James" <JWikston@hatch.ca>
- Re: [rtl] 2.4.0-test6 and rtlinux version
- From: Michael Barabanov <baraban@fsmlabs.com>
- Can real time threads OVERRUN the CPU
- From: "Zaimin Zhong" <zhongzaimin@21cn.com>
- Re: [rtl] Press Controll
- From: tony@ag-tronic.com (Tony Mouawad)
- clock drifts - again- sorry
- From: "i21317" <i21317@caravela.di.fc.ul.pt>
- clock drifts - again- sorry
- From: "i21317" <i21317@caravela.di.fc.ul.pt>
- clock drifts - again- sorry
- From: "i21317" <i21317@caravela.di.fc.ul.pt>
- thread scheduling in user space
- From: Troy Davis <troy.davis@airbornedatasystems.com>
- Re: [rtl] Keyboard Lockup
- From: smithk@biotronik.com (Kirk Smith)
- Trouble upgrading to RT2.0
- From: Theo ten Brummelaar <theo@mtwilson.edu>
- rt_tulip.o hangs on receive
- Re: [rtl] Press Controll
- From: "Andrew Hooper" <andrew@best.net.nz>
- about string
- From: "crzhang" <crzhang@dms.sdut.edu.cn>
- Seeking volunteer manager to spearhead RTiC-Scope development
- From: Edgar Hilton <efhilton@alum.mit.edu>
- ANNOUNCE: RTiC-Lab 0.6.4 released
- From: Edgar Hilton <efhilton@alum.mit.edu>
- ANNOUNCE: RTiC-Scope 0.1 released
- From: Edgar Hilton <efhilton@alum.mit.edu>
- Re: [rtl] thread scheduling in user space
- From: Stuart Hughes <sehughes@zentropix.com>
- RTAI and rt_start_timer
- From: Dirk Alders <alders@emad.uni-wuppertal.de>
- Re: [rtl] RTAI and rt_start_timer
- From: Paolo Mantegazza <mantegazza@aero.polimi.it>
- Re: [rtl] thread scheduling in user space
- From: Paolo Mantegazza <mantegazza@aero.polimi.it>
- RE: [rtl] thread scheduling in user space
- From: "Dresner, Norman A." <norman_a_dresner@md.northgrum.com>
- RE: rtl-digest V1 #100
- From: "KULECZ, WALTER (JSC-SD)" <walter.kulecz1@jsc.nasa.gov>
- Why RTLinux?
- From: Ivan Martinez <ex08@kalman.iau.dtu.dk>
- Jumptec
- From: Andreas Oeder <odr@iis.fhg.de>
- Re: [rtl] thread scheduling in user space
- From: yodaiken@fsmlabs.com
- R: [rtl] Jumptec
- From: "Giovanni Racciu" <grxystum@iol.it>
- R: [rtl] Jumptec
- From: "Giovanni Racciu" <grxystum@iol.it>
- Re: [rtl] about string
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] Why RTLinux?
- Re: [rtl] Why RTLinux?
- From: David Olofson <david.olofson@reologica.se>
- Re: [rtl] about string
- From: smithk@biotronik.com (Kirk Smith)
- lvrtl 1.0.0 - Interfacing LabVIEW and real-time Linux
- From: Philip N Daly <pnd@noao.edu>
- do_gettimeofday still broken in RTL
- From: Karim Yaghmour <karym@opersys.com>
- Job Opportunities
- From: "Michael M. Morrison" <morrison@hyperiontech.com>
- Scheduler glitch? One tasks disappears after delay
- From: smithk@biotronik.com (Kirk Smith)
- Re: [rtl] about string
- From: Stuart Hughes <sehughes@zentropix.com>
- Re: [rtl] Jumptec
- From: Cory Papenfuss <papenfus@juneau.ece.uiuc.edu>
- [Fwd: Hard-realtime using NT v.4 ... not possible w/out NT Kernel changes]
- From: Steven Work <work@salus.med.uvm.edu>
- Re: [rtl] [Fwd: Hard-realtime using NT v.4 ... not possible w/out NT Kernel changes]
- From: eric <eek105@psu.edu>
- Re: [rtl] about string
- From: Heinz.Haeberle@gmx.net
- Task brings the host down
- Re: [rtl] [Fwd: Hard-realtime using NT v.4 ... not possible w/out NT Kernel changes]
- From: David Olofson <david.olofson@reologica.se>
- RTLinux and Java
- From: Robert Reid <robreid@iname.com>
- RTLinux and Java
- From: Robert Reid <r.reid@student.unsw.edu.au>
- Re: [rtl] Task brings the host down
- From: yodaiken@fsmlabs.com
- Re: [rtl] Can real time threads OVERRUN the CPU
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Sundeep Kapila <sundeep@cse.iitb.ernet.in>
- Re: [rtl] thread scheduling in user space
- From: Cort Dougan <cort@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- RE: [rtl] Trouble upgrading to RT2.0
- From: "Stephen D. Cohen" <scohen@xybion.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: yodaiken@fsmlabs.com
- Re: [rtl] Trouble upgrading to RT2.0
- From: Sundeep Kapila <sundeep@cse.iitb.ernet.in>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: "Wayne E. Van Loon Sr." <wevl@pacifier.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Tomasz Motylewski <motyl@stan.chemie.unibas.ch>
- Re: [rtl] Trouble upgrading to RT2.0
- From: yodaiken@fsmlabs.com
- Re: [rtl] Trouble upgrading to RT2.0
- From: yodaiken@fsmlabs.com
- Re: [rtl] Trouble upgrading to RT2.0
- From: David Schleef <ds@stm.lbl.gov>
- Limits on Interrupt Service Routine stack size?
- From: Sheldon Hoffman <Sheldon@ReflectiveComputing.com>
- Re: [rtl] Limits on Interrupt Service Routine stack size?
- From: yodaiken@fsmlabs.com
- Share Memory Maximum
- From: "Guo jin" <jin.guo@zinglabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Trouble upgrading to RT2.0
- From: Michael Barabanov <baraban@fsmlabs.com>
- Re: [rtl] Can real time threads OVERRUN the CPU
- From: "Zaimin Zhong" <zhongzaimin@21cn.com>
- ANNOUNCE: RTiC-Lab has moved!
- From: Edgar Hilton <efhilton@alum.mit.edu>
- RTAI and RTLinux
- From: Ivan Martinez <ex08@kalman.iau.dtu.dk>
- RTLinux 3.0-pre7 available
- From: Cort Dougan <cort@fsmlabs.com>
- Re: lvrtl 1.1.x - Interfacing LabVIEW and real-time Linux
- From: Philip N Daly <pnd@noao.edu>
- Re: [rtl] RTAI and RTLinux
- From: Karim Yaghmour <karym@opersys.com>
- max period of a rt- task
- Re: max period of a rt- task
- From: yodaiken@fsmlabs.com
- [insmod: unresolved symbol]
- From: "Guo jin" <jin.guo@zinglabs.com>
- Re: [rtl] RTAI and RTLinux
- From: Trevor Woolven <trevw@zentropix.com>
- Re: [rtl] RTAI and RTLinux
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] RTAI and RTLinux
- From: Trevor Woolven <trevw@zentropix.com>
- Re: [rtl] RTAI and RTLinux
- From: yodaiken@fsmlabs.com
- rt-thread, user-thread comunication
- From: berger patrick <patrick@zepelin.ensam.inra.fr>
- RTAI install
- From: "daniel sheltraw" <l5gibson@hotmail.com>
- [UPDATE] LTT now supports real-time tracing
- From: Karim Yaghmour <karym@opersys.com>
- Re: [rtl] RTAI and RTLinux
- From: yodaiken@fsmlabs.com
- Re: [rtl] RTAI and RTLinux
- From: Stuart Hughes <sehughes@zentropix.com>
- kernel vfat problems
- From: Paolo Meriggi <flowerpower@iol.it>
- rtl from DiskOnChip
- From: Emeel <linuxusers@inovatech-inc.com>
- Re: [rtl] RTAI and RTLinux
- From: yodaiken@fsmlabs.com
- Re: [rtl] Data acquisition board & graphic card
- From: IGB <rustom@igb.umontreal.ca>
- Re: [rtl] rtl from DiskOnChip
- From: Michal Dobes <dobes@tesnet.cz>
- Re: [rtl] RTAI and RTLinux
- From: Michael Barabanov <baraban@fsmlabs.com>
- Draft of ``Real Time and Embedded HOWTO''
- From: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
- Re: [rtl] RTAI install
- From: Paolo Mantegazza <mantegazza@aero.polimi.it>
[Thread Index]
[Top]
Mail converted by MHonArc 2.4.4