[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

rt_com/setserial question ...

To: rtl <rtl@rtlinux.org>
Subject: rt_com/setserial question ...
From: Robert & Patricia Warner <profwarner@mediaone.net>
Date: Sun, 05 Nov 2000 23:42:07 -0500
In-Reply-To: <15816082522.20001105122845@ruhr-uni-bochum.de>
References: <006401c04589$140b60e0$782da8c0@pallino><006401c04589$140b60e0$782da8c0@pallino>

I have a RTLinux system that does not have the 'setserial' command.  (Due
to space limitations concerns.  It appears that serial ports are still
assigned, even with out setserial.  I have 2 functioning serial ports one
with APC UPS and one with X10 power line connection.

What I would like to do is re-write the X10 related driver/daemon to use
rt_com.  However, (again) I don't have setserial.  Is the correct way, to
use rt_com in this situation, to load it early in startup?

Thanks in advance for your help
Bob Warner

Follow-Ups:
- Re: [rtl] rt_com/setserial question ...
  - From: "Jochen Küpper" <jochen@pc1.uni-duesseldorf.de>

References:
- [rtl] robust boot and shutdown
  - From: "Paolo Meriggi" <meriggi@ing.unibs.it>
- Re: [rtl] robust boot and shutdown
  - From: Alexander Lichius <Alexander.Lichius@ruhr-uni-bochum.de>

Prev by Date: Re: [rtl] robust boot and shutdown
Next by Date: Re: [rtl] robust boot and shutdown
Prev by thread: Re: [rtl] robust boot and shutdown
Next by thread: Re: [rtl] rt_com/setserial question ...
Index(es):
- Date
- Thread