[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [rtl] IRQ on RTLinux or in Modules ?
Denis Brunet (Stage Geosis 09/1998) wrote:
>
> Hello everybody,
>
> I am a newbye in the hardware programming under Linux. I am porting an interrupt controlled software from DOS to Linux.
>
> In this soft there are three IRQs which control three corresponding handlers.
> I saw that it exists in the Rubini's books the modularization in the kernel space and that another way is represented by RTLinux.
> As I have not yet a great knowledge in this area I am not able to choose the right method. I got the RT man and docs but for IRQ handling there are not great infos.
> My only pb deals with interrupts handling. I should prefer handle them if possible in the user space. Do you think that RTLinux is a easier way than the kernel space programming ?
I have two interrupts handlers in RT-Linux with no problems at all. If
you like I can send to you my RT-Linux code.
Regards
Dani
--
______________________________________________________________
JosÈ Daniel MuÒoz FrÌas Daniel@dea.icai.upco.es
Universidad Pontificia Comillas
ICAI. Depto. ElectrÛnica y Autom·tica
Alberto Aguilera 23
28015 Madrid, Spain
Telf. 34-1-5422800 Fax: 34-1-5596569
______________________________________________________________
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail majordomo@rtlinux.cs.nmt.edu OR
echo "unsubscribe rtl <Your_email>" | mail majordomo@rtlinux.cs.nmt.edu
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/